LG-Ericsson IPECS GDC-480H Скачать руководство пользователя страница 47

Страница: 47 / 70

GDC-480H Wireless Handset
User Guide

5.4.1 Dialing from Phonebook

Records in the Phonebook can be searched and a number can be dialed.

To dial a number form the Phonebook:

1. Access the Phonebook menu as described above.
2. Use the

Navigation

( ) to highlight the Find selection and press the

( ) left

soft button; the “Enter Name” prompt is displayed.

Search the records:

1. Enter the first few characters of the name using the dial pad (refer to Appendix Dial

Pad Character Charts). As an example, press 5 twice for ‘k’ and 3 twice for ‘e’ to
search for Kenny.

2. Press the

Find

( ) left soft button to display the matching record.

3. When the record is found, press the

Call

( ) right soft button to dial the number.

3. Press the

Find

( ) left soft button to search all records.

4. Use the Up and Down arrows on the

Navigation

( ) to highlight the desired

record.

5. When the record is found, press the

Call

( ) right soft button to dial the number.

5.4.2 Adding Records to the Phonebook

To add a record to the Phonebook:

1. Access the Phonebook menu as described above.
2. Use the

Navigation

( ) to highlight the Add Entry selection and press the

( ) left soft button.

3. Enter the each character of the name using the dial pad. Up to 14 characters

(including numbers) may be entered. See the charts in the Appendix Dial pad
Character Charts. If you enter the wrong character use the

Delete

( ) right soft

button to delete a character. And press

( ) soft button.

4. Enter the phone number for the record using the dial pad and press the

( ) left

soft button.

5. Select whether or not to use the CO Access code (refer to Edit CO Code) and press

the

( ) left soft button. Selecting the CO Access Code will insert the access

code in front of the number during dialing. The CO Access codes are entered in the
Phone Settings menu discussed later in this guide.

6. “Enter Position” and record number are displayed.

- To save with displayed record number, press

( ) left soft button.

- To modify the record number, press Modify soft button and enter the record number, 1

~ 60, using the dial pad and press the

( ) left soft button. This will store the

number as the record entered.

Содержание IPECS GDC-480H







































































Результаты поиска

Содержание IPECS GDC-480H

Отзывы:

Похожие инструкции для IPECS GDC-480H

Бренды по названию

Популярные бренды

LG-Ericsson IPECS GDC-480H, Руководство пользователя

Результаты поиска

Содержание IPECS GDC-480H

Отзывы:

Похожие инструкции для IPECS GDC-480H

Бренды по названию

Популярные бренды