LFA DTP 25, Руководство пользователя

Страница: 17 / 86

17
Tools and Materials Needed
• Set of metric Allen keys with ball ends
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
Settings and Adjustment
The DTP 25
®
’s settings can be adjusted. Tuning the Tooling and adjusting the motor speed can
help with changing the tablets’ characteristics and how they are ejected from the machine.
Ejection Height
When the Upper Punch is fully lifted, the Lower Punch in its highest position should be flush with
the Die:
If the Lower Punch is above or below the Die’s face, it will affect how smoothly the tablet is ejected.
Adjusting the ejection height will help with this and can vary with different forms of Tooling.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Produce a test tablet to determine how the Tooling should be adjusted.
2. Open the front Perspex door.
WARNING: To prevent any potential personal injury, unplug the DTP 25
®
from
the electrical outlet