LFA DTP 25, Руководство пользователя

Страница: 28 / 86

28
Tooling
Tools and Materials Needed
• Set of metric Allen keys with ball ends
• Circlip pliers and small needle nose pliers
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
If you want to change the shape and diameter of the tablet, or if the Upper Punch, Lower Punch,
and/or Die you currently have is damaged, it is necessary to change the Tooling.
To buy new Tooling from LFA, simply go to
https://www.lfatabletpresses.com/products/tablet-
press-tooling
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
WARNING:
To prevent any potential personal injury, ALWAYS unplug the DTP 25 ®
from the electrical outlet when replacing parts.
Remove the Tooling
1. Remove the four screws securing the Hopper with an Allen key.
CAUTION: To prevent the Hopper from falling and becoming damaged, hold it in
place while its four screws are being removed.
2. Remove the Hopper from the back Perspex panel and Boot.