LFA DTP 25, Руководство пользователя

Страница: 38 / 86

38
Boot Teflon Pad
Tools and Materials Needed
• Set of metric Allen keys with ball ends
• Circlip pliers and small needle nose pliers
• New Boot Teflon Pad
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
The pad at the bottom of the Boot protects the Boot against the Base Plate. The Boot Teflon Pad is
designed to wear over time to avoid damaging more expensive parts.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
WARNING: To prevent any potential personal injury, ALWAYS unplug the DTP 25 ®
from the electrical outlet when replacing parts.
Remove the Boot Teflon Pad
1. Remove the four screws securing the Hopper with an Allen key.
CAUTION:
To prevent the Hopper from falling and becoming damaged, hold it in
place while its four screws are being removed.
2. Remove the Hopper from the back Perspex panel and Boot.