![Lexmark XC9225 Скачать руководство пользователя страница 83](http://html1.mh-extra.com/html/lexmark/xc9225/xc9225_user-manual_1888638083.webp)
Menu item
Description
Supplies
Custom Supply Notifications
Set the unit that the printer uses to estimate supply usage and
trigger custom notifications when user intervention is required.
Note:
This menu item appears only in the Embedded Web
Server.
E
‑
mail Alerts Setup
E
‑
mail Setup
Primary SMTP Gateway
Primary SMTP Gateway Port (25*)
Secondary SMTP Gateway
Secondary SMTP Gateway Port (25*)
SMTP Timeout (30 seconds*)
Reply Address
Always use SMTP default Reply Address
(Off*)
Use SSL/TLS (Disabled*
Require Trusted Certificate (On*)
SMTP Server Authentication (No
authentication required*)
Device
‑
Initiated E
‑
mail (None*)
User
‑
Initiated E
‑
mail (None*)
Use Active Directory Device Credentials
(Off*)
Device Userid
Device Password
Kerberos 5 REALM
NTLM Domain
Disable “SMTP server not set up” error (Off*)
Configure the e
‑
mail settings of the printer.
E
‑
mail Alerts Setup
Setup E-mail Lists and Alerts
E
‑
mail List 1
E
‑
mail List 2
E-mail Events
Specify the e
‑
mail addresses and enable the e
‑
mail alert
events.
Note:
This menu item appears only in the Embedded Web
Server.
Error Prevention
Jam Assist
Off
On*
Set the printer to flush blank pages or pages with partial prints
automatically after a jammed page has been cleared.
Error Prevention
Auto Continue
Off
On* (5 seconds)
Let the printer continue processing or printing a job
automatically after clearing certain printer conditions that
require user intervention.
Note:
An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus
83
Содержание XC9225
