Lexmark MX310dn Скачать руководство пользователя страница 14

2

Firmly grasp the jammed paper on each side, and then gently pull
it out.

Note: 

Make sure all paper fragments are removed.

3

Insert the tray.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

 > 

Clear the jam, press OK

 > 

.

[x]

page jam, clear manual

feeder. [25y.xx]

1

From the multipurpose feeder, firmly grasp the jammed paper on
each side, and then gently pull it out.

Note: 

Make sure all paper fragments are removed.

2

Flex the sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.

3

Reload paper into the multipurpose feeder.

Note: 

Make sure the paper guide lightly rests against the edge of

the paper.

4

From the printer control panel, touch 

 to clear the message

and continue printing. For non

touch

screen printer models, select

Next

 > 

 > 

Clear the jam, press OK

 > 

.

[x]

page jam, open automatic feeder top

cover. [28y.xx]

1

Remove all original documents from the ADF tray.

Note: 

The message is cleared when the pages are removed from

the ADF tray.

 

14

Содержание MX310dn
















Отзывы: