Lexmark CX331 Скачать руководство пользователя страница 39

Страница: 39 / 204

Supported ﬂash drives and ﬁle types

Flash drives

•

Lexar JumpDrive S70 (16GB and 32GB)

•

SanDisk Cruzer (16GB and 32GB)

•

PNY Attache (16GB and 32GB)

Notes:

–

The printer supports high

‑

speed USB ﬂash drives with full

‑

speed standard.

–

USB ﬂash drives must support the File Allocation Table (FAT) system.

File types

Documents

PDF (version 1.7 or earlier)

Images

.JPEG or .jpg

Conﬁguring conﬁdential jobs

From the control panel, navigate to:

Settings

Security

Conﬁdential Print Setup

Conﬁgure the settings.

Use

Max Invalid PIN

Set the number of times an invalid PIN can be entered.

Note:

When the limit is reached, the print jobs for that user name are deleted.

Conﬁdential Job
Expiration

Set the expiration time for conﬁdential print jobs.

Note:

Conﬁdential held jobs are stored in the printer until they are released or

deleted manually.

Repeat Job Expiration

Set the expiration time for a repeat print job.

Note:

Repeat held jobs are stored in the printer memory for reprinting.

Verify Job Expiration

Set the expiration time that the printer prints a copy before printing the remaining
copies.

Note:

Verify jobs print one copy to check if it is satisfactory before printing the

remaining copies.

Reserve Job Expiration

Set the expiration time that the printer stores print jobs.

Note:

Reserve held jobs are automatically deleted after printing.

Require All Jobs to be
Held

Set the printer to hold all print jobs.

Keep duplicate
documents

Set the printer to print all documents with the same ﬁle name.

Содержание CX331













































































































































































































Результаты поиска

Содержание CX331

Отзывы:

Похожие инструкции для CX331

Бренды по названию

Популярные бренды

Lexmark CX331, Руководство пользователя

Результаты поиска

Содержание CX331

Отзывы:

Похожие инструкции для CX331

Бренды по названию

Популярные бренды