Lexmark CS748de, Руководство по обслуживанию

Страница: 52 / 504

2-14
Service Manual
5026
Go Back
Previous
Next
37 Insufficient memory
to collate job
• Select
Continue
to print the portion of the job already stored and begin collating the rest
of the job.
• Cancel the current job.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
37 Insufficient memory
for Flash Memory
Defragment operation
• Select
Continue
to stop the defragment operation and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
• If this does not fix the problem, replace the system. See
“System board removal” on
page 4-163
.
37 Insufficient memory,
Some Held Jobs Were
Not Restored
• The printer deleted some held jobs in order to process current jobs.
• Select
Continue
to clear the message.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
37 Insufficient memory,
Some Held Jobs Will
Not Be Restored
• The printer was unable to restore some or all of the confidential or held jobs on the hard
disk.
• Select
Continue
to clear the message.
• If this message occurs again, replace the hard drive.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
37 Insufficient Defrag
Memory
There is insufficient memory to perform the Flash Memory Defragment operation. The user
can:
• Delete font, macros, and other data in memory.
• Install additional printer memory.
38 Memory Full The following options are available:
• Select
Continue
to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• Install additional printer memory.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
39 Complex Page The page is too complex to print. Options are:
• Select
Continue
to continue. The job may not print correctly.
• Cancel the job.
• Additional memory may fix the problem.
50 PPDS Font Error • Select
Continue
to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
51 Defective Flash • Select
Continue
to clear the message and continue printing.
• Install different flash memory before downloading any resources to flash.
• If this does not fix the problem, replace the system board. See
“System board removal”
on page 4-163
.
Error code Action