manualshive.com logo in svg

Lexmark CS310 Series, Руководство пользователя

Поделиться
Скачать
Lexmark CS310 Series Скачать руководство пользователя страница 60

Use

To

Feed Direction

Short Edge

Long Edge

Specify the feed direction if the paper can be loaded in either
direction.

Notes:

•

Short Edge is the factory default setting.

•

Long Edge appears only when the longest edge is shorter than
the maximum width supported in the tray.

Reports menu

Reports menu

Use

To

Menu Settings Page

Print a report containing information about paper loaded in trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the
network connection, and other information.

Device Statistics

Print a report containing printer statistics such as supply information and
details about printed pages.

Network Setup Page

Print a report containing information about the network printer settings, such
as the TCP/IP address.

Note: 

This menu appears only in network printers or printers connected

to print servers.

Network [x] Setup Page

Print a report containing information on network printer settings, such as
the TCP/IP address information.

Notes:

•

This menu item is available only when more than one network option
is installed.

•

This menu item appears only in network printers or in printers
connected to print servers.

Profiles List

Print a list of profiles stored in the printer.

Print Fonts

PCL Fonts

PostScript Fonts

Print a report in English of all the fonts available for the printer language
currently set in the printer.

Note: 

A separate list is available for PCL and PostScript emulations. Each

emulation report contains print samples and information about the
available fonts for each language.

Print Defects Guide

Print a report containing information about repeating print defects.

Print Demo

Demo Page

[list of available demo pages]

Print demo files that are available in the RIP code, the flash option, and the
disk option.

Understanding the printer menus

60

Содержание CS310 Series





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды