Installing the printer on a wireless network (Macintosh)
Note:
Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1
Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer
on.
1
2
2
Locate the printer MAC address.
a
From the printer control panel, navigate to:
>
Reports
>
>
Network Setup Page
>
or
>
Reports
>
Network Setup Page
b
In the Standard Network Card section, look for
UAA (MAC)
.
Note:
You will need this information later.
Enter the printer information
1
Access the AirPort options:
In Mac OS X version 10.5 or later
From the Apple menu, navigate to:
System Preferences
>
Network
>
AirPort
In Mac OS X version 10.4
From the Finder, navigate to:
Applications
>
Internet Connect
>
AirPort
2
From the Network Name pop
‑
up menu, select
print server [yyyyyy]
, where the
y
's are the last six digits of the MAC
address located on the MAC address sheet.
3
Open a Web browser.
4
From the Bookmarks menu, select
Show
or
Show All Bookmarks
.
Additional printer setup
38