Lexmark 5495 - X Color Inkjet, Руководство по факсу

Страница: 46 / 52

8
Press .
9
Press or repeatedly to view the current Fax Forwarding setting.
10
To turn off Fax Forwarding, press or repeatedly until
Off
appears.
11
Press to save the setting.
Can receive but not send faxes
Check mode selection To make sure the printer is set for faxing, press Fax Mode .
Check document
placement Load the original document facedown in the ADF or in the upper left corner of the scanner glass.
Check the Dial Prefix
setting
1
From the control panel, press Fax Mode .
2
Press .
3
Press or repeatedly until
Fax Setup
appears.
4
Press .
5
Press or repeatedly until
Dialing and Sending
appears.
6
Press .
7
Press or repeatedly until
Dial Prefix
appears.
8
Press .
9
To change the setting, press or repeatedly until
Create
appears.
10
Press .
11
Enter the prefix to be dialed before each telephone number.
12
Press .
Check Speed Dial
number
•
Check to make sure Speed Dial has been programmed for the number that you wish to dial.
See “Setting up Speed Dial” on page 37.
•
As an alternative, dial the telephone number manually.
Be sure that printer is
detecting a dial tone
•
See “Sending a fax while listening to a call (On Hook Dial)” on page 24.
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this
means it did not recognize the dial tone.
2
From the control panel, press Fax Mode .
3
Press .
4
Press or repeatedly until
Fax Setup
appears.
5
Press .
6
Press or repeatedly until
Dialing and Sending
appears.
7
Press .
8
Press or repeatedly until
Dial Method
appears.
9
Press .
10
Press or repeatedly until
Dial Behind PBX
appears.
11
Press to save this setting.
Troubleshooting
46