D
ISCONNECT
AND
RECONNECT
THE
POWER
CORD
1
Disconnect the power cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the light is not on, press .
Software does not install
These are possible solutions. Try one or more of the following:
C
HECK
YOUR
OPERATING
SYSTEM
The following operating systems are supported: Windows Vista, Windows XP, Windows 2000, and Mac OS X.
Note:
Windows 2000 users should use Service Pack 3 or later.
C
HECK
YOUR
SYSTEM
REQUIREMENTS
Check that your computer meets the minimum system requirements listed on the printer box.
C
HECK
USB
CONNECTION
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
USB symbol.
R
EINSTALL
THE
SOFTWARE
1
Turn off and then restart your computer.
2
Click
Cancel
on all New Hardware Found screens.
3
Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
R
ECONNECT
POWER
SUPPLY
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
Troubleshooting
41
Содержание 5495 - X Color Inkjet
Страница 1: ...X5400 Series Fax Guide January 2008 www lexmark com...
Страница 4: ...4...