Troubleshooting
Copying
Printing
Scanning
Faxing
Troubleshooting
83
Basics
Index
www.lexmark.com
Lexmark X125
Memory To Print
Your copy job will print after the print job is complete.
Open Cover And Remove
Paper Jam
Open the operator panel and remove the jammed document.
PC Not Available
(with beep warning and
return to Ready state)
• Most of the time, when PC Not Available appears on your operator
panel display, you are attempting to make multiple copies while
your All-In-One is set to a color copy mode.
If you would like to make multiple black and white copies without a
computer, you can change the color mode to Black Draft, Black
Normal, or Black Photo using the menus on your operator panel
display.
If you would like to make multiple color copies, you must attach
your All-In-One to your computer using a USB cable.
– If you have installed the All-In-One software on your computer,
click Start
Programs
Lexmark X125 Settings Utility. Use the
Lexmark X125 Settings Utility to adjust the copy settings.
– For All-In-One CD software installation instructions, refer to the
Quick Reference.
• If PC Not Available appears on your operator panel and you are
not attempting to make multiple copies, verify that a standard USB
cable is connected to the computer and that the computer is on
and not in sleep mode.
Remove Paper Jam Then
Press Start
Clear the
Paper jam
, and then press Start/Yes.
Message:
Solution: