Leviton A7810, Инструкция по установке и эксплуатации

Страница: 11 / 44

8
5.2 Laptop/Computer Setup
5.2.1
You must have a computer to access and configure the EMB HubLite . This computer must
have an Ethernet connection (on the LAN or by direct connection) and must have a web
browser installed.
Note: If your building already has an existing LAN to which the EMB HubLite is attached, you
can use an existing computer on that LAN. Check with your network administrator for details.
If this option is available, use a LAN connected computer and skip to the “ EMB HubLite
administration overview” section below.
The remainder of this section will assume the installer has brought a laptop to the site, and will
connect the laptop to the building LAN, or directly to the EMB HubLite . Attach the laptop to the
EMB HubLite or LAN as shown in figure 6, ethernet hookup.
5.2.2
Attach the Laptop to the EMB Hub Lite or to the LAN. The A7810 will automatically detect
whether a direct or crossover cable is required, and will reverse polarity accordingly . This
feature will allow you to use either a straight ethernet cable or a crossover ethernet cable
interchangeably.
If the Laptop is to be attached to an existing LAN, obtain a static IP address
(or use DHCP addressing) from the network administrator.
5 CONFIGURATION
WEB
VERSION