EN Translation of the Original Instructions
1. INTENDED USE
The appliance is designed for dry and wet vacuuming in accordance with these instructions. It is not
suitable for vacuuming flammable, explosive and harmful substances. It is also not suitable for vacuuming
very fine dust particles such as plasterboard dust or cement dust. Vacuuming these may result in damage to
the motor and malfunction. The appliance is
not suitable for commercial use.
Vacuuming
of flammable
or explosive materials or those which endanger health is prohibited.
The appliance should be used only for the purposes for which it is intended. Any other use is considered as
improper use. The operator / user will be liable for any damages or injuries resulting from improper use.
The manufacturer will not be held responsible for injuries resulting from
use which does not comply with
the instruction
in this manual, or form incorrect use.
WARNING! Read this manual and general safety Instructions carefully before using the
appliance, for your own safety. All operators shall be adequately instructed on
the use of
this appliance.
2. SAFETY PRECAUTIONS FOR ELECTRIC APPLIANCES
ATTENTION. Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and all instructions for future reference.
Work area
safety
•
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
Electrical safety
•
Always check that the power supply corresponds to the voltage on the rating
plate.
•
Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body
is earthed or grounded.
•
Do not expose power tools to rain or wet conditions. Water entering a power
tool
will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
24
Содержание VC0030
