Connecting an electrical tool
The appliance
has been equipped with an electronic outlet for connection of your electrical equipment. The
appliance
is switched on automatically the moment you switch on the electrical tool.
•
Connect the hose (
1
) directly to the dust extraction outlet of the electrical
tool.
•
Insert the mains plug of the electrical tool into the outlet (
9
).
WARNING:
The maximum rating for an appliance operated from the auxiliary power supply is 2000 W.
6.
OPERATION
Make sure the power cord has been fully unwound before you switch on the appliance. The air leaving the
grids must not be hindered.
When using the appliance
in combination with an electrical tool, switch on the appliance
first
to the II
position
and then the electrical tool.
The vacuum cleaner is switched on together with turning on the
connected electrical tool. After switching off the tool the vacuum
cleaner is working for a few seconds.
Use the universal nozzle for vacuuming up dust from large surfaces. To keep delicate materials free from
scratches, replace the flat adapter (5a) for
the brush adapter
(5b) into the universal floor nozzle.
Use the crevice nozzle for vacuuming up dust from narrow and confined spaces.
Use the brush nozzle
for vacuuming up dust from furniture.
When vacuuming up liquids, make sure the nozzle is not fully submerged in the liquid to be vacuumed up.
Clean the appliance
after use according to instructions and wind the power cord around the shell.
Switching on and off (Fig. I and J)
•
To switch on the appliance
for use without an electrical tool, set the on/off switch (8) to “I”.
•
To switch on the appliance
for use with an electrical tool, set the on/off switch (8) to
„II“
(AUTO)
.
•
To switch the appliance
off, set the on/off switch (8) to “O”.
Vacuuming up waste material
and dust
•
Check whether the dust filter
(19)
has been
FITTED
.
•
Mount the tube (
4
) to the handgrip (3)
.
Vacuuming up dust released from an electrical tool
•
Check whether the dust filter
(19)
has been
FITTED
.
•
Connect the hose (
1
) directly to the dust extraction outlet of the electrical tool.
Vacuuming up liquids
•
Check whether the dust filter
(19)
has been
REMOVED
and attach the sponge filter (21) instead.
•
Make sure the inside of the collector
(
15
) is clean and free from dust.
•
Mount the tube (
4
) to the handgrip (3)
.
Emptying the collector
•
Switch off and unplug the cleaner
.
•
Release the clamps (11), remove the motor unit (13) from the collector (15).
•
Empty the collector
(
15
).
Blowing
• In order to blowing mount flexible hose (1) into the neck of the blower (10) and turning the lock.
28
Содержание VC0030
