Configuration / device parameters
Leuze electronic GmbH + Co. KG
BPS 8
52
8.4
Overview of the parameter structure
Using the BPS Configuration Tool program, parameters can be changed via the service interface. These
parameters are separated into individual tabs in the Graphical configuration menu.
The following tabs are available:
MM-
Deactivation of the MMTyyy function.
If the cyclical output via the service interface is no longer required, the func
-
tion must be deactivated using the command MM-.
PC20
Resets all parameters in the BPS 8 to Leuze default values.
V
Version query, or puts the device into service mode.
This requires a "V" to be transmitted during the initialization phase of the
BPS 8.
Command
Description
Tab name
Folder contents
Control
• Measurement start mode
• Measurement stop mode
• Maximum polling interval
Position detection
• Resolution for the position value
• Integration time
• Preset value added to tape value
• Counting direction for position calculation
• Scaling factor
• Offset value
• Maximum permitted measurement length
• Minimum permitted measurement length
• Position tolerance time
• Error output delay
Communication
• Baud rate
• Data mode
• Protocol
• Address
Switching input
• Inversion
• Mode
• Debounce time
• Start-up delay
• Pulse duration
• Switch-off delay
• Function
Switching output
• Activation
• Deactivation
• Pulse duration
