Configuration and diagnostics software - Sensor Studio
Leuze electronic GmbH + Co. KG
BCL 92
24
6.5.1
Decode tab
Fig. 6.3:
Decode
tab
Code table
(CODE TABLE)
Here, the codes which are to be decoded are set.
Codes which are not enabled are not decoded!
Note:
We recommend enabling
only
the code types which are to actually
be read with the corresponding element numbers.
Element number
In the field Element number, up to three element entries may be en-
tered.
A range of permissible elements is indicated by a dash:
e.g., 4-40 elements.
To select a range, set the check mark beneath
Interval mode
. Up to
three fixed element numbers with comma:
e.g.: 8,13 elements
Both are also possible, but the range must be specified first (select
Interval mode
):
e.g.: 4-10,20 elements
Labels to be decoded
(COMPLETENESS / Number of
bar codes)
Here, the number of the bar codes to be decoded within a read cycle
(one reading gate) is set.
NOTICE
If the code EAN128 is to be read, 3 additional characters are to be set for the code identifier.
