Leuze 72000103, Оригинальная инструкция по эксплуатации

Страница: 18 / 43

Mounting
Leuze electronic GmbH + Co. KG ELC 100 18
Tab. 5.1: Reaching over the vertical protective field of electro-sensitive protective equipment(excerpt from ISO/
EN ISO 13855)
Height a
of the
point of
opera-
tion
[mm] Height b of the upper edge of the protective field of the electro-sensitive protective
equipment
900 1000 1100 1200 1300 1400 1600 1800 2000 2200 2400 2600
Additional distance C
RO
to the danger zone [mm]
2600 0 0 0 0 0 0 0 0 0 0 0 0
2500 400 400 350 300 300 300 300 300 250 150 100 0
2400 550 550 550 500 450 450 400 400 300 250 100 0
2200 800 750 750 700 650 650 600 550 400 250 0 0
2000 950 950 850 850 800 750 700 550 400 0 0 0
1800 1100 1100 950 950 850 800 750 550 0 0 0 0
1600 1150 1150 1100 1000 900 850 750 450 0 0 0 0
1400 1200 1200 1100 1000 900 850 650 0 0 0 0 0
1200 1200 1200 1100 1000 850 800 0 0 0 0 0 0
1000 1200 1150 1050 950 750 700 0 0 0 0 0 0
800 1150 1050 950 800 500 450 0 0 0 0 0 0
600 1050 950 750 550 0 0 0 0 0 0 0 0
400 900 700 0 0 0 0 0 0 0 0 0 0
200 600 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
Depending on the specified values you can work with the above-mentioned table in three ways:
1. Given are:
• Height a of the point of operation
• Distance S of the point of operation from the safety sensor, and additional distance C
RO
To be determined is the required height b of the upper beam of the safety sensor and thereby its protective
field height.
Ä Look for the line with the specification of the point of operation height in the left column.
Ä
In this line, look for the column with the next highest specification for additional distance C
RO
.
ð The required height of the upper beam of the safety sensor is up top in the column head.
2. Given are:
• Height a of the point of operation
• Height b of the upper beam of the safety sensor
To be determined is the required distance S of the safety sensor to the point of operation and thereby addi-
tional distance C
RO
.
Ä
In the column head, look for the column with the next lowest entry for the height of the upper beam of
the safety sensor.
Ä
Look for the line with the next highest specification of the point of operation height a in this column.
ð In the intersection point of the line and the column, you will find additional distance C
RO
.
3. Given are:
• Distance S of the point of operation from the safety sensor, and additional distance C
RO.
• Height b of the upper beam of the safety sensor