Leuze electronic VisionREADER 2300, Техническое описание

Страница: 27 / 66

Leuze electronic
Commissioning
Leuze electronic VR 2300 25
TNT
35/7-2
4
V
7.3.2 Service Operating Mode
Connection
You can connect a PC or terminal to the VR 2300 via the serial interface and configure the
VR 2300 through this connection. For this, you need a crossed RS 232 connection cable
(null modem cable) that provides the connections RxD, TxD and GND, as well as RTS and
CTS (see figure 7.1).
Connection of the service interface VR 2300 standalone
Figure 7.1: Connecting the service interface of the VR 2300 to a PC/terminal
If the VR 2300 is connected to a connector unit MA 2 or MA 2 L, you can use the 9 pin sub-
D service connector in the connector unit or connect the interface cable directly to the termi-
nals of the connector unit (see figure 7.2).
Connection of the service interface (terminals) of the connector unit MA 2/
MA 2 L
Figure 7.2: Connecting the service interface (terminals) of the MA 2/MA 2 L to a PC/termi-
nal
MA 2 / MA 2 L RS 232 PC
5
1
23
3
24