Commissioning
Leuze electronic
LSIS 472i
26
1
Actual position of the marking
2
Status signaling of switching outputs IO5 … IO8
3
Capture range
4
Display of the active check program
0 for
Rack Near
1 for
Rack Far
Figure 8.1: Indicators in the display
• A semicircle visible in the position display indicates that the marking is in the field of view of the
device but not in the capture range.
Turn the device towards the semicircle.
1
Marking indicator outside of capture range
Figure 8.2: Marking in the field of view, but not in the capture range
• A black dot in the position display indicates that the marking is in the capture range of the device.
The device is not yet optimally aligned.
1
Marking indicator in the capture range
Figure 8.3: Marking in the capture range
• If the marking is not in the field of view of the device (no marking indicator), the device must be
mechanically repositioned.
Align the device until the marking indicator (black dot) is exactly in the square in the middle of the dis
-
play.
1
2
3
4
1
1
