Device configuration
18
GS 754B
Leuze electronic
6.4.2
Changeover of the edge assignment for single-object measurement
Only one piece of edge information can be output via the analog interface. With single-object
measurement, the sensor sees two edges. Using these edges, information such as object
diameter and object middle can be calculated. These edge assignments can be configured.
Figure 6.2:
Changeover of the edge assignment for single-object measurement
ASCII commands for changing over the edge assignment
:
Edge assignment for analog output (single-object measurement)
D,d
object diameter
$
edge, middle
(
edge, inside (default)
)
edge, outside
Transmitter
Edge, outside
Transmitter
Edge, middle
Transmitter
Edge, inside
Transmitter
Object diameter
