Device configuration
16
GS 754B
Leuze electronic
Table 6.2:
Parameterizing commands GS 754B
By entering the ASCII character "R", the state on delivery is restored. "R", however, has no
effect on the configuration of the switching function and the switching level.
Notice
The descriptions of the PIN 2 switching functions (chapter 6.4.3 et seq.) always relate to the
PNP switching level.
If the PIN 2 switching level is configured to NPN, all levels must be inverted.
Edge assignment for analog output (single-object measurement)
D,d
object diameter
analog
$
edge, middle
analog
(
inner edge (default)
analog
)
outer edge
analog
Function PIN 2
T,t
teach input function
analog
O,o
switching output function
serial and analog
S, s
synchronization / trigger input function
serial and analog
L, l
activation input function (LED transmitter ON)
serial and analog
Switching function PIN 2
1)
<
standard function (default) (chapter 6.4.6)
serial and analog
>
standard function, inverted (chapter 6.4.6)
serial and analog
*
photoelectric sensor function, dark switching
(presence monitoring)
serial and analog
#
photoelectric sensor function, light switching
(presence monitoring)
serial and analog
Switching level PIN 2
P,p
PNP switching output (default)
serial and analog
N,n
NPN switching output
serial and analog
G,g
push-pull switching output
serial and analog
1)
relative to the PNP switching level; refer to the following note.
