Leuze electronic DCR 55, Руководство по эксплуатации

Страница: 49 / 94

Configuration control
Leuze electronic DCR 55 49
Code Description Command Format Op-
tions De-
fault Notes/Examples
Cellphone Enable CD OP S/P/R/
G CE 0 0 Disable Cellphone reading mode
1 Enable Cellphone reading mode
Upload Images CD OP S/P/R/
G DI 0 0 Disable uploading images
Example: CDOPPDI0
1 Enable uploading
Example: CDOPPDI1
When Upload Images is set, each im-
age captured by the reader will be sent
as a stream of data to the host
Decode Trigger Mode CD OP S/P/R/
G MD 0 0 Trigger Mode (default)
Example: CDOPSMD0
1 Motion Detection Mode
Example: CDOPSMD1
2 Continuous scan Mode
Example: CDOPSMD2
Notes: TBD
Target Tolerance (percent) CD VA S/P/R/
G TT 1600 For reader to accept a barcode, it must
be within certain distance from the cen-
ter of the image. The distance is defined
as a percentage of the barcode’s
smaller dimension. For example, with a
10 x 20 mm barcode and a setting of
150 (%), the barcode must be within 15
mm of the center of the image.
Any value over 1000 is considered infi-
nite tolerance, and no target checking is
performed.
Valid Range: 1 to 1000
Example : CDVASTT1600
Duplicate Block Time (ms) CD VA S/P/R/
G BT 0 Consecutive duplicate barcodes (i.e.
barcodes that contain the same data)
are blocked for this amount of time (in
milliseconds). 0 turns off blocking of du-
plicate barcodes.
Valid Range: 0 to xx
Example : CDVASBT100
Block Duplicates CD VA S/P/R/
G BD 0 0 Disable – do not block dupli-
cates
Example : CDVASBD0
1 Enable –block duplicates for the
amount of time set in DC-
VAGBT
Example : CDVASBD1
If enabled, the reader will not output the
same barcode until the barcode has not
been seen for the “duplicate block time”
period.