END GATE POSITION - OPTION 1
OPTIONAL
When the CrashPad tent
[P]
is not in use, the Thick
Awning Support Poles
[R]
can be removed and the
Awning can be ‘closed’ against Door Panel of the Tent
using the Velcro located in the bottom corners of the
door. [Fg. 35]
[Fg. 35]
END GATE POSITION - OPTION 2
Hook the Tailgate Cable
[O]
onto the Tailgate Bracket
[S]
to create a flat surface with the end gate.
[Fg. 31-32]
[Fg. 31]
[Fg. 32]
Remove the hinge pins that lock the tailgate.
Lay the End Gate on top of one trailer fender.
Hook the s-hook end of the End Gate Table Cables
[O]
into
the trailer c-channel rails.
NOTE:
Slits are provided in the
Crash Pad Tent
[P]
to allow the
s-hooks to easily access the
c-channel. [Fg. 33-34]
[Fg. 33]
[Fg. 34]
O
O
S
PINS
Page 9 of 10
