PROPER TENT CARE
We advise you to assemble this product at least one at home before going on a trip.
Obtain a familiarity with the assembly and disassembly process will help ensure your satisfaction and ease concerns you
may have should you find yourself setting up in the dark or in adverse weather conditions
IMPORTANT NOTICE:
You may compromise the original FIRE RETARDENCY and WATER REPELLENCY protective
coatings when you apply sprays or other chemical treatments to your tent. This fabric has been factory-treated and is
HIGHLY WATER REPELLENT; however; it is NOT WATER PROOF. ALL tents can experience seam leakage during wet
weather. If you desire additional moisture protection, use a seam sealing compound ONLY be sure to follow manufactures
directions.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS PRODUCT FABRIC. THIS
FABRIC IS NOT FIREPROOF! It is made with flame resistant fabric which meets CPAI-84 specifications.
The application of any foreign substance to the fabric may render the flame resistant properties
ineffective.
Do NOT ERECT NEAR an open flame. NEVER use any fuel burning, oxygen consuming devices, or any
device that produces fumes – including, but not limited to: cooking stoves, lanterns, candles, hibachis, or
heaters – in or around your product. Inhalation of fumes may result in carbon monoxide poisoning, injury
and/or death.
Your product is NOT machine washable. Your product is NOT machine dry-able. One of the easiest
ways to damage your product is storing is while wet. If you must close camp in the rain, follow
these directions carefully:
- As soon as possible: Open your product and ensure that every area of the fabric is clean and
completely dry before rolling up for storage.
- If Necessary, hang product outside or loosely drape over a ladder in your garage or spare room for a few days, turning it
inside and out to prevent trapping pockets of moisture or debris.
- Use a soft brush to wipe away surface dirt.
To clean your product: Hand wash using mild dish-washing soap and soft bristle brush, then allow the fabric to completely
air dry.
Storing a wet fabric for as little as 24 hours in warm weather is likely to cause fabric mildew. Once Mildew sets in the
stains are permanent. Stains cannot be removed without potential harm to the fabrics coatings; chemicals or cleaning
agents used to remove dirt and stains may irreversibly harm the fabric.
Salts, mildew and other caused and subsequent effects are not covered under the limited warranty.
Important: Prolonger exposure to sunlight that causes UV damage and/or the use of a non-recommended foreign
substances on the synthetic material may damage the fabric properties and IS NOT COVERED BY THE LIMITED
WARRANTY.
REPAIRING A TEAR:
For small tears use a self-adhesive patch kit or polyurethane based sealer compound. We
recommend visiting a local repair shop for larger tears.
ZIPPER MAINTENANCE:
Nylon coil zippers are self-repairing. In the event of separation, move the slider to the
beginning of the slipper tape and re-work the zipper.
.
.
NOTICE:
All Manual information is subject to change without notice. Revised editions
will be available for free download at LetsGoAero.com. Manual information is considered
factual until made obsolete by a revised version.
Follow this QR-Code or visit
LetsGoAero.com/manuals to check for an updated version:
Page 10 of 10
