16. Light Kit Installation
17. Install Side Marker Lights
The left and right Amber Front Side Marker Lights plug into the wire harness. Each marker light has two plugs,
which are interchangeable. Locate the corresponding plugs on the Wire Harness, and route the Light along with the
Wire Harness through the A-Frame Tube. Using two self tapping screws*, attach each side marker light base to the
main frame tube. Then, press the light onto the base.
Self Drilling
Screws
Crimps
Front Side
Marker Light
Page 19 of 21
CONNECTOR
Attach tail lights to tail light brackets.
NOTE: Tail light with GREEN WIRE
on the curb side of the trailer.
IMPORTANT: Take care tightening
each nut only so far as to compress
the lock washer, then STOP.
Join three wires, matching like colors,
with connectors provided. Use a wire
crimper as detailed below (remove .5”
of wire sheathing from end of each
wire if not already done). Cover the
three wires with convolute provided.
Attach tail light brackets to back
corners of trailer.
JOIN
CRIMP
COVER
