KMD1060E
12
3.3.2.1.
Power Supply
The power supply is a high regulation, auto ranging power supply. It provides power to all
components in the COOL CURE 365/365-HP/390/395/405. The mounting bracket is also
used as a heat sink and to mount the housing cover.
3.3.2.2.
Controller Board
The controller board is the user interface to the COOL CURE 365/ 390/ 395. It integrates the
power supply and the optics and allows the user to define operation parameters.
3.3.2.3.
Interlock Switch
The interlock switch cuts all power to the unit if the top cover is removed. If the top is not
properly mounted on the base of the unit, the interlock switch will not be activated, and the
unit will not power up.
4.0 Installation/Setup
Before unpacking the system, inspect the shipping container for any damage such as
broken corners, deformity, holes and tears.
After unpacking the system, examine the equipment for any damage i.e. unusual dents or
rattling of components. Check components against the packing list to make sure all
components were shipped correctly.
Should one find any major damage immediately inform the shipping company and
AUV/LESCO Inc.
Note:
Any delay in reporting damage may invalidate the claim.
Make sure to keep the shipping container in case there is a need to ship the system back to
AUV/LESCO.
4.1 System Components
The COOL CURE 365/ 390/ 395 comes with the following separately packaged components:
•
Light guide
(OPTIONAL)
•
Footswitch
•
UV safety glasses
•
COOL CURE 365/ 390/ 395 Manual
•
Power Cord
