Lesco Cool Cure 365 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 32

Lesco Cool Cure 365 Скачать руководство пользователя страница 12

KMD1060E

11

3.3.1.1.

UV LED

The UV LED is a high power, high flux density LED that is designed for long life at a very
high intensity. The LED is mounted integral to the Heat sink for optimum performance.

3.3.1.2.

SAFETY SWITCH

The LED is also connected to an interlock switch located on the light guide receptacle
where the proximal end of the light guide is inserted.

This switch disables the LED to ensure there is no unintentional exposure, if the light
guide is missing or improperly inserted into the COOL CURE 365/365-HP/390/395/405.

3.3.1.3.

NOSE PIECE

The Nose piece is a precision mechanical assembly that aligns the LED and light guide
for optimal focal point location. It also supports the heat sink assembly, light guide safety
switch, and a ball plunger.

Note: Light guide must be pushed in all the way or UV light will

not

be delivered.

3.3.2

Power Supply Housing

This  area,  which  is  encased  by  a  sheet  metal  cover,  contains  the  power  supply,  controller
board,  and  the  main  interlock  switch.    Only  qualified  personnel  should  remove  the  cover.
There are no serviceable parts inside.  The function and relationship of each component in
the power supply housing is described below:

Power Supply

Controller Board

Interlock Switch

«
...
10
11
12
13
14
...
»

Содержание Cool Cure 365

































Отзывы:

Нет отзывов