Lesco Cool Cure 365 Скачать руководство пользователя страница 2

 
 

KMD1060E 

1

 

UV STANDARD PRODUCT WARRANTY: 

 

All ultraviolet equipment manufactured by American Ultraviolet West/LESCO (AUV 

West/LESCO) is warranted to be free from defects in material and workmanship under normal and 
proper use for one (2) full years from the date of original shipment. As of November 29, 2011, normal 
use is based on an 8-hour work day, 5 days a week (8*5*104=4160Hrs). AUV West/LESCO will repair 
or replace at its option any defective parts 

(excluding consumables listed below)

 when returned to 

AUV/LESCO by the purchaser within the warranty period using a Return Material Authorization (RMA) 
number provided by AUV West/LESCO. The purchaser is responsible for all transportation charges for 
shipping the equipment to and from AUV West/LESCO. Equipment may not be returned, whether for 
warranty or other purposes, without an RMA number. Any equipment that is received without obtaining 
an RMA number will be refused and returned to the purchaser at their expense. AUV West/LESCO 
assumes no expense or liability for repairs made outside its plant without the written consent of an 
authorized AUV West/LESCO representative, or for any labor costs which are so incurred. AUV 
West/LESCO will not be liable for any consequential costs or damages of any kind.  

If it is not feasible for the purchaser to return the equipment to AUV West/LESCO for repair, 

then by mutual consent the purchaser will cover the expenses for an authorized AUV West/LESCO 
service representative to travel to the equipment’s location to perform a diagnostic evaluation and any 
necessary repairs. Warranty period for any and all equipment which is repaired while under original 
equipment warranty will remain one (2) full years from date of original shipment. Any repairs made 
after the original equipment warranty period has expired are warranted for ninety (90) days from the 
date the repaired equipment is shipped back to the purchaser. After all warranties have expired, the 
diagnostic evaluation fee for all non-warranty equipment is $150.00. 

 

PARTS AND ACCESSORIES WARRANTY: 

 

AUV West/LESCO warrants all spare parts and accessories which are purchased separately from UV 
equipment to be free from defects in material and workmanship under normal and proper use for a 
period of 60 days. 

Consumable items not covered under the warranty include LED Chip, Fan 

Filters and Light guides. 
 
CONDITIONS OF WARRANTY: 

 

For above warranty on AUV West/LESCO equipment to be enforceable, the purchaser must: 

 

1. 

Be the original owner and provide proof of purchase. All warranties are non-transferable.

 

2. 

Obtain pre-authorization by calling AUV West/LESCO for RMA number at 310-784-2930.

 

3. 

Return any items suspected of being defective to AUV West/LESCO for diagnostic evaluation and 
possible repair. All returns must be correctly packaged and shipped via an appropriate courier. AUV 
West/LESCO is not liable for any damage or charges incurred as a result of improper packaging 
and shipping by the purchaser.

 

4. 

Keep accurate records of the time elapsed from installation to removal in sufficient detail to 
determine the running time and environment of equipment in question. The purchaser will allow 
AUV West/LESCO to verify such records if necessary. 

 

 
EXCLUSIONS: 

The following will void all AUV West/LESCO warranties stated above: 

 

 

Defects resulting from improper installation or use

 

 

Unauthorized service

 

 

Tampering with equipment

 

 

Lack of preventative maintenance

 

 

Acts of God, or other circumstances beyond the control of AUV West/LESCO

 

There are no warranties, expressed or implied, except as stated above or provided in writing by an 
authorized AUV/LESCO representative. 

     

                                                                           

 

WARRANTY AUV/LESCO EQUIPMENT POLICY 

Содержание Cool Cure 365

































Отзывы: