Leroy-Somer PROXIDRIVE, Руководство для продвинутых пользователей

Страница: 57 / 124

57
ADVANCED USER GUIDE
PROXIDRIVE
IP66 variable speed drive
MENU 7: ASSIGNMENT OF ANALOG INPUTS AND OUTPUTS
LEROY-SOMER
3756 en - 05.2004 / b
7.3 - Explanation of parameters in
menu 7
Note : The sampling period is 6 ms for menu 7 analog inputs
and outputs.
7.01, 7.02
and :ADI1 and ADI2 level
Adjustment range
As analog input
: 0 to 100.0% of the adjustment
range for the parameter assigned
to the input
As digital input : 0.00% (corresponds to logical 0)
or 100.0% (corresponds to
logical 1)
Used to read the value of the analog input or the state of the
corresponding digital input.
This input uses an analog/digital converter with 10-bit
resolution.
7.03
:ADIO3 input or output level
Adjustment range : 0 to 100.0% of the adjustment range for
the parameter assigned to the analog
input or output.
Used to read the corresponding analog input or output. This
input (or output) uses an analog/digital converter with 10-bit
resolution.
The sampling period is 2 ms maximum.
7.04, 7.05
and :Not used
7.06
:ADI1 mode
Adjustment range : 0 to 7
Factory setting
: 6
Used to define the type of signal on the ADI1 input.
7.07
:Not used
7.08, 7.12
and :ADI1 and ADI2 input scaling
Adjustment range : 0 to 2.50
Factory setting
: 1.00
These parameters are used, if necessary, to scale the analog
inputs. However, this rarely proves necessary since the
maximum input level (100%) automatically corresponds to
the max. value of the destination parameter.
Not used when the input is used as a digital input.
7.09, 7.13
and :ADI1 and ADI2 input invert
Adjustment range : 0 or 1
Factory setting
: 0
This parameter is used to invert the input signal.
0 (OFF): Input signal not inverted.
1 (On):
Input signal inverted.
7.10
:ADI1 input destination
Adjustment range : 0 0 . . 0 0 0 0 to 2 2 1 1 . . 5 5 1 1
Factory setting : 1 1 . . 3 3 6 6 : Analog input 1 assigned to
analog reference 1
This address should contain the number of the parameter
which you wish to assign to input ADI1.
Only numerical parameters can be assigned if the input is
configured as an analog input and bit parameters if the input
is configured as a digital input.
If an unsuitable parameter is programmed, no assignment will
be taken into account.
7.11
:ADI2 input mode
Adjustment range : 0 to 8
Factory setting
: 4
Used to define the type of signal on the ADI2 input.
7
7
.
.
0
0
6
6
LED display Description
0 0-20
0-20mA current signal, 0mA
corresponds to the minimum reference
1 20-0
20-0mA current signal, 20mA
corresponds to the minimum reference
2 4-20
4-20mA current signal with detection
of signal loss. 4mA corresponds to
the minimum reference
3 20-4
20-4mA current signal with detection
of signal loss. 20mA corresponds
to the minimum reference
4 4-.20
4-20mA current signal without detection
of signal loss. 4mA corresponds to the
minimum reference
5 20-.4
20-4mA current signal without detection
of signal loss. 20mA corresponds to the
minimum reference
6 uoIt 0-10V voltage signal
7 d-In The input is configured as a digital input
7 7 . . 0 0 1 1 7 7 . . 0 0 2 2
7
7
.
.
0
0
3
3
7
7
.
.
0
0
4
4
7
7
.
.
0
0
5
5
7
7
.
.
0
0
6
6
7 7 . . 0 0 7 7
7
7
.
.
1
1
1
1
LED display Description
0 0-20
0-20mA current signal, 0mA
corresponds to the minimum reference
1 20-0
20-0mA current signal, 20mA
corresponds to the minimum reference
2 4-20
4-20mA current signal with detection
of signal loss. 4mA corresponds to
the minimum reference
3 20-4
20-4mA current signal with detection
of signal loss. 20mA corresponds
to the minimum reference
4 4-.20
4-20mA current signal without
detection of signal loss. 4mA
corresponds to the minimum
reference
5 20-.4
20-4mA current signal without detection
of signal loss. 20mA corresponds to the
minimum reference
6 uoIt 0-10V voltage signal
7 d-In The input is configured as a digital input
8 PTC
The input is configured to manage the
motor PTC sensors
7
7
.
.
0
0
8
8
7
7
.
.
1
1
2
2
7
7
.
.
0
0
9
9
7
7
.
.
1
1
3
3
7 7 . . 1 1 0 0
7 7 . . 1 1 1 1