Lepu Medical AIView 12V, Руководство оператора

Страница: 36 / 292

3-1
Chapter 3 Getting Started
3.1 Unpacking and Checking
Before unpacking, examine the packaging carefully for signs of
damage. If any damage is found, please contact the carrier
immediately.
If the packaging is intact, perform unpacking inspection according to
the following steps:
1. Open the package, take out the monitor and its accessories
from the box carefully.
2. Check all materials according to the packing list.
3. Check the monitor for any mechanical damages.
4. Check all the accessories for scratches or defects.
Please contact your local distributor or the manufacturer in case of
any problems. We will offer the best solution for your satisfaction.
Warning
When disposing of the packaging materials, be sure to comply with your
local waste control regulations or the hospital’s waste disposal system.
Caution
Keep the packaging materials out of the reach of children.
Caution
Before use, verify whether the packages are intact, especially the
packages of single use accessories. In case of any damage, do not apply it
to patients.

Note
Save the packing case and packaging material as they can be used if the
device must be reshipped.
3.2 Installation Precautions
Warning
Devices connected to the monitor must meet the requirements of the
applicable IEC standards. The system configuration must meet the
requirements of the IEC 60601-1-1 medical electrical systems standard.
Any personnel who connect devices to the equipment’s signal input/output
port are responsible for providing evidence that the safety certification of
the devices has been performed in accordance with IEC 60601-1-1. If you