Lenovo ThinkServer TD340 Скачать руководство пользователя страница 175

Страница: 175 / 240

6. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor

socket. Place the old microprocessor on a static-protective surface.

Notes:

• Do not touch the gold contacts on the bottom of the microprocessor.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 104. Removing the microprocessor

7. Touch the static-protective package that contains the new microprocessor to any unpainted surface on

the outside of the server. Then, remove the new microprocessor from the package.

8. Remove the protective cover that protects the gold contacts on the bottom of the new microprocessor.

Do not touch the pins on the microprocessor socket and the gold contacts on the bottom of the new
microprocessor.

Figure 105. Do not touch the pins

Chapter 6

Installing, removing, or replacing hardware

163

Содержание ThinkServer TD340

















































































































































































































































Результаты поиска

Содержание ThinkServer TD340

Отзывы:

Похожие инструкции для ThinkServer TD340

Бренды по названию

Популярные бренды

Lenovo ThinkServer TD340, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Результаты поиска

Содержание ThinkServer TD340

Отзывы:

Похожие инструкции для ThinkServer TD340

Бренды по названию

Популярные бренды