manualshive.com logo in svg
  • Главная
  • /
  • Lenovo
  • /
  • ThinkServer RD550
  • /
  • Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Lenovo ThinkServer RD550, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Поделиться
Скачать
Lenovo ThinkServer RD550 Скачать руководство пользователя страница 68

3. Check and configure the BIOS settings for your specific needs. See “Using the Setup Utility

program” on page 47.

•

Using the BIOS recovery jumper

1. Remove all external media from the drives and turn off all attached devices and the server. Then,

disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.

2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 61.

3. Remove the server cover. See “Removing the server cover” on page 61.

4. Locate the BIOS recovery jumper on the system board. See “System board jumpers” on page 40.

Then, remove any parts and disconnect any cables that might impede your access to the jumper.

Note:

Do not remove the memory modules or microprocessors.

5. Remove the jumper cap from the jumper cap storage. See “System board jumpers” on page 40.

6. Note the orientation of the jumper cap and then install the jumper cap on the BIOS recovery jumper.

7. Connect the server to an ac power source. The server turns on and then turns off automatically.

8. Move the jumper cap back to the jumper cap storage. See “System board jumpers” on page 40.

9. Wait for several minutes. When the BIOS recovery process is completed, the server turns on

automatically.

10. Ensure that the Setup Utility program starts normally. See “Starting the Setup Utility program” on

page 47. Then, disconnect the server from the ac power source.

11. Reinstall any parts and reconnect any cables. Then, reinstall the server cover. See “Completing

the parts replacement” on page 152.

12. Connect the server to an ac power source and turn on the server. Check and configure the BIOS

settings for your specific needs. See “Using the Setup Utility program” on page 47.

Note:

If you cannot recover the BIOS after using the instructions in this topic, the BIOS read-only memory

(ROM) might be damaged. You must replace the system board. Contact the Lenovo Customer Support
Center.

Configuring RAID

This topic provides information about RAID and the utility programs that are available for you to configure
RAID.

This topic contains the following information:

•

“About RAID” on page 54

•

“Configuring RAID using the Lenovo ThinkServer Deployment Manager program” on page 56

•

“Configuring the advanced SATA or SAS hardware RAID” on page 56

About RAID

RAID, an acronym for Redundant Array of Independent Disks, is a technology that provides increased
storage functions and reliability through redundancy. This is achieved by combining multiple hard disk drives
into a logical unit, where data is distributed across the drives in one of several ways called RAID levels.

When a group of independent physical hard disk drives are set up to use RAID technology, they are in a
RAID array. This array distributes data across multiple hard disk drives, but the array appears to the host
server as one single storage unit. Creating and using RAID arrays provides high performance, such as the
expedited I/O performance, because several drives can be accessed simultaneously.

54

ThinkServer RD550 User Guide and Hardware Maintenance Manual

Содержание ThinkServer RD550

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды