Lenovo ThinkServer RD550, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 112 / 192

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 152.
Installing or removing the rear backplane/cage kit
The rear backplane/cage kit enables you to install up to two 2.5-inch hard disk drives for your server models
with 3.5-inch drives. You can purchase a rear backplane/cage kit from Lenovo.
Installing the rear backplane/cage kit
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 59.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the rear backplane/cage kit and follow those instructions in
addition to the instructions in this topic.
To install the rear backplane/cage kit, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 61.
3. Remove the server cover. See “Removing the server cover” on page 61.
4. Locate the rear backplane/cage kit bay. See “Server components” on page 25.
5. Lift the metal shield that protects the rear backplane/cage kit bay. Store the shield in case that you later
remove the kit and need the shield to cover the bay.
98
ThinkServer RD550 User Guide and Hardware Maintenance Manual