Lenovo THINKSERVER 387 Скачать руководство пользователя страница 172

Страница: 172 / 248

10. Hold the new microprocessor by its edges and align the notches

on the new microprocessor with the

tabs

in the microprocessor socket. Then, carefully lower the new microprocessor straight down into

the microprocessor socket.

Note:

The small triangle

on one corner of the new microprocessor is the microprocessor orientation

indicator. The new microprocessor is in the correct orientation when this indicator faces toward the
beveled corner

of the microprocessor socket.

Figure 95. Installing the microprocessor

11. Close the microprocessor retainer. Gently press down the small handle and then push the handle inward

to lock the retainer into position and secure the new microprocessor in the socket.

Figure 96. Securing the microprocessor in the socket

12. Reinstall the heat sink and fan assembly. See “Replacing the heat sink and fan assembly” on page 154.

13. If you are instructed to return the old microprocessor, follow all packaging instructions and use any

packaging materials that are supplied to you for shipping.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 168.

160

ThinkServer Hardware Maintenance Manual

Содержание THINKSERVER 387

























































































































































































































































Результаты поиска

Содержание THINKSERVER 387

Отзывы:

Похожие инструкции для THINKSERVER 387

Бренды по названию

Популярные бренды

Lenovo THINKSERVER 387, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание THINKSERVER 387

Отзывы:

Похожие инструкции для THINKSERVER 387

Бренды по названию

Популярные бренды