Lenovo ThinkCentre M60e Скачать руководство пользователя страница 13

Страница: 13 / 122

Chapter 1. Product overview

This chapter provides information about the computer features, specifications, software programs provided
by Lenovo, and locations of connectors, components, parts on the system board, and internal drives.

Features

This section introduces the computer features. The information covers a variety of models.

To view the information about your specific model, do one of the following:

• Go into the Setup Utility program by following the instructions in Chapter 7 “Using the Setup Utility

program” on page 59. Then, select

Main

➙

System Summary

to view the information.

• In the Windows environment, click

Start

, right-click

Computer

, and select

Properties

to view the

information.

Microprocessor

Your computer comes with one of the following microprocessors (internal cache size varies by model type):

• Intel

Celeron

microprocessor

• Intel Celeron dual-core microprocessor

• Intel Core™ 2 Duo microprocessor

• Intel Pentium

dual-core microprocessor

Memory

Your computer supports up to 2 double data rate 3 dual inline memory modules (DDR3 DIMMs).

Internal drives

• Optical drive: DVD-ROM or DVD-R (available in some models)

• Serial Advanced Technology Attachment (SATA) hard disk drive

Video subsystem

• Integrated graphics for a Video Graphics Array (VGA) connector

• Peripheral Component Interconnect (PCI) Express x16 graphics card slot on the system board for a

discrete graphics card

Audio subsystem

• Integrated high-definition (HD) audio

• Audio line-in connector, audio line-out connector, and microphone connector on the rear panel

• Microphone connector and headphone connector on the front panel

Connectivity

• 100/1000 Mbps integrated Ethernet controller

System management features

• Ability to store power-on self-test (POST) hardware test results

Содержание ThinkCentre M60e



























































































































Результаты поиска

Содержание ThinkCentre M60e

Отзывы:

Lenovo ThinkCentre M60e, Руководство пользователя, Страница: 13 / 122

Результаты поиска

Содержание ThinkCentre M60e

Отзывы: