Lenovo ThinkCentre A58e Скачать руководство пользователя страница 46

Страница: 46 / 110

•

ChkDigits:

Contains a 2-digit check-digit value to ensure the following:

– Diagnostics were run on the specified date.

– Diagnostics were run on the specified computer.

– The diagnostic error code is recorded correctly.

•

Text:

Description of the error.

Note:

See “Diagnostic error codes” on page 45 for error code listings.

Quick and Full erase - hard disk drive

The diagnostics program offers two hard disk drive format utilities:

• Quick Erase Hard Drive

• Full Erase Hard Drive

Quick Erase Hard Drive provides a DOS utility that performs the following:

• Destroys the Master Boot Record (MBR) on the hard disk drive.

• Destroys all copies of the FAT Table on all partitions (both the master and backup).

• Destroys the partition table.

• Provides messages that warn the user about a non-recoverable process.

Full Erase Hard Drive provides a DOS utility that performs the following:

• Performs all the steps in Quick Erase.

• Provides a DOS utility that writes random data to all sectors of the hard disk drive.

• Provides an estimate of time to completion along with a visual representation of completion status.

• Provides messages that warn the user about a non-recoverable process.

Important:

Make sure that all data is backed up before using the Quick or Full Erase functions.

To select the Quick Erase Hard Drive or Full Erase Hard Drive utility, do the following:

1. Select the UTILITY option on the toolbar and press Enter.

2. Select either the QUICK ERASE or FULL ERASE HARD DISK option and follow the instructions.

Viewing the test log

To view details of a failure or to view a list of test results, use the following procedure from any test category
screen:

1. Press F3 to activate the log file.

2. Press F3 again to save the file to diskette or press F2 to print the file.

Hardware Maintenance Manual

Содержание ThinkCentre A58e















































































































Результаты поиска

Содержание ThinkCentre A58e

Отзывы:

Похожие инструкции для ThinkCentre A58e

Бренды по названию

Популярные бренды

Lenovo ThinkCentre A58e, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание ThinkCentre A58e

Отзывы:

Похожие инструкции для ThinkCentre A58e

Бренды по названию

Популярные бренды