Lenovo ThinkCentre A58e Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 110

background image

PC-Doctor for Rescue and Recovery

The PC-Doctor for Rescue and Recovery diagnostic program is part of the Rescue and Recovery workspace
on each Lenovo computer. Use the PC-Doctor for Rescue and Recovery program if you are unable to
start the Windows operating system.

To run the PC-Doctor for Rescue and Recovery program from the Rescue and Recovery workspace, do
the following:

1. Turn off the computer.

2. Repeatedly press and release the F11 key when turning on the computer. When you hear beeps or see a

logo screen, stop pressing the F11 key. The Rescue and Recovery workspace opens after a short delay.

3. From the Rescue and Recovery workspace, select

Launch advanced Rescue and Recovery

®

Diagnose hardware

. The PC-Doctor for Rescue and Recovery diagnostic program opens.

4. Select the diagnostic test you want to run. Then, follow the instructions on the screen.

For additional information about running the PC-Doctor for Rescue and Recovery program, refer to the
PC-Doctor for Rescue and Recovery help system.

Note:

If you encounter failures that prevent you from gaining access to the Rescue and Recovery workspace,

you can run the PC-Doctor for Rescue and Recovery diagnostic program after using a rescue medium
to recover the computer from failures and gaining access to the Rescue and Recovery workspace. See
“Creating and using rescue media” in your

ThinkCentre User Guide

.

PC-Doctor for DOS

You can also download the latest version of the PC-Doctor for DOS diagnostic program from
http://www.lenovo.com/support. The PC-Doctor for DOS diagnostic program runs independently of the
Windows operating system. Use the PC-Doctor for DOS diagnostic program if you are unable to start the
Windows operating system or if the two diagnostic programs preinstalled on your computer have not
been successful in isolating a possible problem. You can run the PC-Doctor for DOS diagnostic program
from a diagnostic disc that you created.

Creating a diagnostic disc

This section provides instructions on how to create a diagnostic disc.

To create a diagnostic disc, do the following:

1. Download a self-starting bootable CD/DVD image (known as an ISO image) of the diagnostic program

from:http://www.lenovo.com/support

2. Use any CD/DVD burning software to create a diagnostic disc with the ISO image.

Running the diagnostic program from a diagnostic disc

This section provides instructions on how to run the diagnostic program from a diagnostic disc that you
created.

To run the diagnostic program from a diagnostic disc that you created, do the following:

1. Make sure the optical drive you want to use is set as the first boot device in the startup device sequence.

See “Selecting a startup device” on page 43.

2. Make sure the computer is turned on and then insert the disc into the optical drive. The diagnostic

program opens.

38

Hardware Maintenance Manual

«
...
42
43
44
45
46
...
»

Содержание ThinkCentre A58e















































































































Отзывы:

Нет отзывов

Похожие инструкции для ThinkCentre A58e

Бренд: Oberheim Страницы: 64

ATV-TURBO - WINDOWS 98

Бренд: OCZ Страницы: 5

ANTI-VIRUS FOR MICROSOFT EXCHANGE 8.00 -

Бренд: F-SECURE Страницы: 29

Бренд: TruCluster Страницы: 88

HyperMedia Center

Бренд: Genius Страницы: 12

[email protected]/DOS Version 7.xx

Бренд: Amanda Страницы: 84

Amanda Portal CallQ Agent

Бренд: Amanda Страницы: 61

Amanda Portal Telephone Features

Бренд: Amanda Страницы: 226

Unified Messenger

Бренд: Avaya Страницы: 35

NETWORK 4.1.0 -

Бренд: Red Hat Страницы: 40

RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND

Бренд: Tech Source Страницы: 2

Бренд: FieldServer Страницы: 48

Бренд: Nortel Страницы: 93

IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE 2010

Бренд: Novell Страницы: 54

VIRUS|POWERCORE

Бренд: Access Страницы: 124

Бренд: Canon Страницы: 102

Бренд: Lenovo Страницы: 5

Бренд: M-Audio Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды