Lenovo ThinkAgile HX2320 Appliance, Руководство пользователя

Страница: 17 / 100

Chapter 2. Server components
Use the information in this section to learn about each of the components associated with your server.
Front view
The front view of the server varies by model. Depending on the model, your server might look slightly
different from the illustrations in this topic.
Figure 5. Front view of ThinkAgile HX2320 Appliance and HX2321 Certified Node servers
Table 2. Components on the front of the server
1
VGA connector (available on some models)
2
Pull-out information tab
3
XClarity Controller USB connector
4
USB 3.0 connector
5
Operator information panel
6
Rack latch (right)
7
Hot-swap drive bays
8
Drive status LED (yellow)
9
Drive activity LED (green)
10
Rack latch (left)
1 VGA connector (available on some models)
Used to attach a high-performance monitor, a direct-drive monitor, or other devices that use a VGA
connector.
2 Pull-out information tab
The XClarity Controller network access label is attached on the pull-out information tab.
3 XClarity Controller USB connector
Depending on the setting, this connector supports USB 2.0 function, XClarity Controller management
function, or both.
• If the connector is set for USB 2.0 function, you can attach a device that requires a USB 2.0 connection,
such as a keyboard, a mouse, or a USB storage device.
• If the connector is set for XClarity Controller management function, you can attach a mobile device
installed with the application to run XClarity Controller event logs.
• If the connector is set to have both functions, you can press the ID button for three seconds to switch
between the two functions.
© Copyright Lenovo 2019
13