Lenovo IdeaCentre B345 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 69

background image

Step 4.

Remove the rear cover. Refer to “Removing the rear cover”.

Step 5.

Remove the computer stand. Refer to “Removing the computer stand”.

Step 6.

Remove the optical drive. Refer to “Replacing the optical drive”.

Step 7.

Remove the middle cover. Refer to “Removing the middle cover”.

Step 8.

Remove the EMI cover. Refer to “Removing the EMI cover”.

Step 9.

Remove the screw that secures the TV-Tuner card to the motherboard.

Step 10. Disconnect the antenna cable(s) from the TV-Tuner card.

Step 11. Pull the TV-Tuner card upward to remove it from the card port on the motherboard.

Step 12. To install the new TV-Tuner card:

a.

Insert the notched end of the TV-Tuner card into the card port on the motherboard.

b.

Secure new TV-Tuner card with the screw to the motherboard.

c.

Connect the antenna cable(s) to the new TV-Tuner card.

Step 13. Reattach the EMI cover, middle cover, optical drive, computer stand and the rear cover.

Replacing the speaker system

Note:

Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

To replace the speaker system:

Step 1.

Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Step 4.

Remove the rear cover. Refer to “Removing the rear cover”.

Step 5.

Remove the computer stand. Refer to “Removing the computer stand”.

Step 6.

Remove the optical drive. Refer to “Replacing the optical drive”.

Step 7.

Remove the middle cover. Refer to “Removing the middle cover”.

Step 8.

Remove the EMI cover. Refer to “Removing the EMI cover”.

52

IdeaCentre B345–B545 All-In-OneHardware Maintenance Manual

«
...
56
57
58
59
60
...
»

Содержание IdeaCentre B345






































































Отзывы:

Нет отзывов

Похожие инструкции для IdeaCentre B345

Бренд: Radio Shack Страницы: 408

Бренд: HP Страницы: 66

Бренд: HP Страницы: 28

Бренд: Dell Страницы: 72

Бренд: Sharp Страницы: 83

Бренд: Sharp Страницы: 168

Бренд: U-Line Страницы: 6

Vaio VPCJ115FX/B

Бренд: Sony Страницы: 2

Vaio VPCJ112GX/B

Бренд: Sony Страницы: 2

Vaio VPCJ113FX/B

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

VAIO VPCF215FX/BI

Бренд: Sony Страницы: 2

VAIO VPCF13QFX/B

Бренд: Sony Страницы: 2

VAIO VPCF13MGX/B

Бренд: Sony Страницы: 2

VAIO VPCF13NFX/B

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды