Lenovo IdeaCentre B345 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 69

background image

Replacing the keyboard and mouse

Attention:

Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

To replace the keyboard and mouse

Step 1.

Remove any media (disks, CDs, DVDs or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Note:

Your keyboard will be connected to a USB connector on one side or at the rear of the

computer.

Step 4.

Disconnect the defective keyboard cable from the computer and connect the new keyboard cable
to the same connector.

Note:

The mouse can be replaced using the same method.

Replacing the power cord or power adapter

Attention:

Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

To replace the power cord and power adapter:

Step 1.

Remove any media (diskettes, CDs, DVDs, or memory cards) from the drives, shut down your
operating system, and turn off all attached devices and the computer.

Step 2.

Locate the connector for the power cord. Refer to “Rear view”.

28

IdeaCentre B345–B545 All-In-OneHardware Maintenance Manual

«
...
32
33
34
35
36
...
»

Содержание IdeaCentre B345






































































Отзывы:

Нет отзывов

Похожие инструкции для IdeaCentre B345

Бренд: Canon Страницы: 160

Бренд: Barco Страницы: 202

Бренд: C&T Страницы: 99

Бренд: EUROCOM Страницы: 271

Бренд: IBM Страницы: 74

Бренд: IBASE Technology Страницы: 32

Бренд: Moxa Technologies Страницы: 27

Бренд: Vecow Страницы: 160

Бренд: Dell Страницы: 51

INSPIRON Inspiron 1100

Бренд: Dell Страницы: 95

Inspiron 24-5400

Бренд: Dell Страницы: 26

Бренд: Dell Страницы: 20

Бренд: Acer Страницы: 43

Бренд: Acer Страницы: 72

Predator PO3-640

Бренд: Acer Страницы: 27

Predator G Series

Бренд: Acer Страницы: 52

Бренд: Acer Страницы: 39

Predator PO3-600

Бренд: Acer Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды