Lenovo 30151IU Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 60

Lenovo 30151IU Скачать руководство пользователя страница 5

Chapter 1. About this manual

3

implementation date and expects its suppliers to be ready to support
Lenovo’s requirements and schedule. Products sold in 2005, will contain
some RoHS compliant FRUs. The following statement pertains to these
products and any product Lenovo produces containing RoHS compliant
parts.

RoHS compliant Lenovo IdeaCentre Q parts have unique FRU part
numbers. Before or after June, 2006, failed RoHS compliant parts must
always be replaced using RoHS compliant FRUs, so only the FRUs
identified as compliant in the system HMM or direct substitutions for
those FRUs can be used.

Products marketed before June 2006 Products marketed after June 2006
Current or
original part

Replacement
FRU

Current or
original part

Replacement
FRU

Non-RoHS

Can be Non-RoHS Must be RoHS

Must be RoHS

Non-RoHS

Can be RoHS

Non-RoHS

Can sub to RoHS

RoHS

Must be RoHS

Note:

A direct substitution is a part with a different FRU part number that
is automatically shipped by the distribution center at the time of
order.

Related Web URLs are:

Lenovo information for Suppliers website:

•

http://www-03.ibm.com/procurement/proweb.nsf/
ContentDocsByTitle/States~Infofor+suppliers
RoHS Directive:

•

http://europa.eu.int/eur-lex/pri/en/oj/dat/2003/l_037/
l_03720030213en00190023.pdf
California Senate Bills 20, 50:

•

http://www.ciwmb.ca.gov/HHW/Events/AnnualConf/2004/
presentation/MPaparian.pdf

«
...
3
4
5
6
7
...
»

Содержание 30151IU





























































Отзывы:

Нет отзывов