Lenovo 30151IU Скачать руководство пользователя страница 50

Страница: 50 / 60

Hardware Maintenance Manual

6.  Align then insert the new wireless card to the wireless socket.
7.  Screw in the two screws on the wireless card.
8.  Connect the antenna cable to the wireless card.
9.  Install the computer cover. Refer to “Completing the installation”.

Replacing the motherboard

To replace the motherboard:

1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Remove the memory module. Refer to step 3 of the “Replacing the

memory module” section.

3. Remove the CPU heat sink. Refer to steps 2 to 4 of the “Replacing the

CPU heat sink” section.

4. Remove the CPU. Refer to steps 3 to 4 of the “Replacing the CPU”

section.

5. Remove the hard disk drive. Refer to steps 2 to 3 of the “Replacing the

hard disk drive” section.

6. Remove the front bezel. Refer to “Removing the front bezel”.
7. Remove the optical disk drive. Refer to step 3 of the “Replacing the

optical disk drive” section.

8. Remove the TV tuner card. Refer to steps 3 to 5 of the “Replacing the

TV tuner card” section.

9. Remove the wireless card. Refer to steps 3 to 5 of the “Replacing the

wireless card” section.

Содержание 30151IU





























































Результаты поиска

Содержание 30151IU

Отзывы:

Похожие инструкции для 30151IU

Бренды по названию

Популярные бренды

Lenovo 30151IU, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 30151IU

Отзывы:

Похожие инструкции для 30151IU

Бренды по названию

Популярные бренды