Lenovo 10AQ, Руководство по обслуживанию

Страница: 139 / 184

Figure 70. Removing the solid-state drive from the storage converter
2. Take the new solid-state drive out of the static-protective package.
3. Position the solid-state drive into the storage converter so that the holes in the drive are aligned with
the corresponding holes in the converter. Then, install the four screws to secure the solid-state drive
to the converter.
Figure 71. Installing the solid-state drive into the storage converter
Replacing the solid-state drive on the bottom of the optical drive bay
To replace the solid-state drive on the bottom of the optical drive bay, do the following:
Chapter 10
.
Replacing FRUs (machine type: 10AQ)
135