Lenord, Bauer GEL 8310, Руководство по эксплуатации, Страница: 141 / 226

S
TORAGE LOCATIONS FOR MACHINE PARAMETERS
A-7
8310/8610-8
1 8 Unit6 Configuration unit 6 GEL 8610
Assignment of 1 axis to the 6th unit (GEL 8610 only)
X
input of the number of axes with the following possibilities:
X = 0: no axis
X = 1: 1 axis (6)
1
6
9
Mem.card Memory card
GEL 8310
GEL 8610
Activation of a write protection for the optional memory card
0 n.protct
no protection, i.e., data can be stored any time (via
&+;
resp.
>
)
1 protect data cannot be stored
1
7
10
Card.fkt Special function with memory card
GEL 8310
GEL 8610
Determines if the equipment-specific axis parameters (AP) are not to be read from
or written to the optional memory card; if the AP have never been stored on a
certain memory card and you try to read the card incl. AP, then the message
mem.card error
is shown
0 excl. AP axis parameters are not stored/overwritten
1 incl. AP axis parameters are stored/overwritten
1
8
11
Password
Password inquiry for nominal value
programming
GEL 8310
GEL 8610
Specifies if the programming mode for nominal values is to be accessible via a
password only
0
inactive no password inquiry
1 active with password inquiry (define the password at the following
storage location)