icomfort
Touch Screen 7−Day Programmable Thermostat
Page 15
Tests − Page
1 of 1
After the tests have been started, the screen will describe which test is
running (see figure 20). After concluding that the results are the desired
results for any test, press
next
(if using TEST ALL) to proceed to the next
test or
done
(if running a single test).
CURRENT TEST: Blower
Check Blower Operation
done
cancel
CURRENT TEST: Blower
Check Blower Operation
next
cancel
TEST ALL example
single test example
Figure 20. Typical tests results screens
After pressing
done
, the Testing finished" screen will appear (see figure
21). At this point, use the
EXIT
tab
(if you are finished with all setup), or
use
diagnostics
tab (to analyze the system), or use
equipment
tab (if
you wish to make any changes to device details).
setup
tests
equipment
HELP
alerts
diagnostics
EXIT
The Testing Process is Finished
press the ’tests’ tab to run more tests.
press the ’EXIT’ tab to start normal operation.
Figure 21. Testing finished screen
