Lennox EVB125, Руководство по установке

Страница: 7 / 20

7
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Top View
Alcove
Hearth
H
Insert
Fireplace
Top of Insert
(see "C" on Fig. 3)
2
3
4
5
6
7
8
9
10
11
12
0
0
18"
17"
16"
15"
1
\
14"
D
C
Figure 3
Figure 4a
MINIMUM CLEARANCES TO COMBUSTIBLES
These appliances can be installed in most residential fi replace
confi gurations. If installed close to an adjacent wall, ensure that
the minimum clearances to combustible surfaces are maintained.
A local building inspector should review your plans prior to
installation.
Refer to Figures 3, 4a, 4b and 6 for Clearances to Combustibles.
Minimum clearances include spacers/standoffs or surfaces to
combustible construction.
Notes for Table 5:
* This includes any projections such as shelves, window
sills, mantels, spacers/standoffs or surfaces to combustible
construction etc. above the appliance. Paint or lacquer used
to fi nish the mantel must be heat resistant in order to avoid
discoloration.
** If hearth is elevated, subtract 1 inch of hearth extension
required for every 2 inches of height (see Figure 6).
Mantel
Ceiling (or)
Alcove Height
Side
Wall
A
G
E
C
B
Hearth Protection
Side View
Top of Insert
Mantel Clearance, Model: EBVI30: The
mantel should be located in the shaded
area (light gray) shown below.
Existing Fireplace Hearth
F
15"
14"
2"
4"
6"
7"
At 7" hearth height, no hearth extension is required
16"
Figure 6
Side View
of Insert
Hearth Protection: For every 2" of hearth height,
subtract 1" of hearth extension required.
Figure 5
I
Alcove Minimum Width: The specifi ed minimum width of the
alcove cannot be reduced with the use of wall protection.
Clearances
Top of Insert louver
(see "C" on Fig. 3)
0
0
8”
5”
1” 12”
15 1/2"
13"
11"
\
8 1/2"
D
C
Figure 4b
Side View
Mantel Clearance, Model: EBVI25: The
mantel should be located in the shaded
area (light gray) shown below.
13 1/2"
Clearances to
Combustibles Inches (millimeters)
EBVI25 EBVI30 Min./Max.
A Side Wall 8” (203 mm) 8” (203 mm) Min.
B Ceiling or Alcove Height 64” (1626 mm) 64” (1626 mm) Min.
C* Mantel Height See Fig. 4b See Fig. 4a Min.
D* Mantel Projection from
Wall See Fig. 4b See Fig. 4a Min.
E Clearance to Floor 0” (0 mm) 0” (0 mm) MAX.
F** Hearth Protection
(from Fireplace Face) **16” (406 mm) **16” (406 mm) Min.
G Hearth Protection
Width 44” (1118 mm) 40” (1016 mm) Min.
H Alcove Width 45” (1143 mm) 48” (1219 mm) Min.
I Alcove Depth 36” (914 mm) 36” (914 mm) MAX.
Table 5
MODELS: EBVI25 & EBVI30