7-Day Programmable
iComfort Wi‐Fi
®
Flex Thermostat
11
17. If you don't get the pop up box that says the
registration request has been forwarded, then the
email was not sent to the server and the return
registration link will not be sent to your email
address. Try all the router troubleshooting
procedures and if you still can't get it to send the
email, cycle the power to the thermostat. This will
cause the thermostat to ask for the Lennox server
mac address again and try to resend the email.
18. If all is correct, refer user to their Router
manufacturer and Network provider. Router may
have incoming fire wall check with service provider.
ROUTER SIGNAL STRENGTH
After connecting to your router, you can check your
signal strength by pushing the Wi-Fi icon on the home
screen, then the networks button, then your network
button, then the router info button (see figure 10).
A strong wireless signal (RSSI) is indicated by a
NEGATIVE decibel number in the range from -46 to
-58db; anything greater than -70db will not connect.
If you are connected but have a signal above -70db then
you may consider adding a signal repeater/extender or
making some of the other router adjustment mentioned
in the Router / Modem Check section
router Info
connect
Push router info
button
Figure 10. Access connection data
AT+NSTAT=?
MAC=00:ID:C9:A0:40:95
WSTATE=
CONNECTED
MODE=AP
BSSID=98:FC:11:47:B9:00 SSID= LINKSYS” CHANNEL=6 SECURITY=NONE
RSSI=
-78
IP ADDR=192.168.8.117 SUBNET=255.255.255.0 GATEWAY=192.168.8.1
DNSI=192.168.1.1 DNS2=0.0.0.0
RXCOUNT=14 TXCOUNT=345
OK
Figure 11. Connection Data
