Lenel DirecDoor, Руководство по установке

Страница: 10 / 90

Introduction
10
DirecDoor Installation Guide
–
Ground terminal lug
–
SEMS screws
–
Protection diodes
–
Metal Oxide Varistors (MOVs) surge absorbers
–
Network cable ferrite
–
1K end-of-line resistors
•
Mounting hole template
•
Installation screwdriver
•
DirecDoor Quick Installation Instructions
•
DirecDoor Integrated Configuration Tool Quick Guide
The items received in your shipment depend on the items ordered. Inspect the package and contents
for visible damage. If any components are damaged or missing, do not use the unit; contact the
supplier immediately. If you need to return the unit, you must ship it in the original box.
Specifications
For UL-compliant installations, refer to UL Compliance on page 80.
Enclosure Specifications
Physical dimensions 10.15 inches high x 9.15 inches wide x 3.04 inches deep
(258 mm high x 232 mm wide x 77 mm deep)
Operating environment +35°F to +122°F (+2°C to +50°C)
Humidity range 5% to 95% non-condensing
Thermal air cooling At least 6 inches (15.2 cm) of clearance is required on all four sides of
the controller.
Power
Controller power input
requirements
•
IEEE802.3af 16 watt Class 0 Mode A or B Power over Ethernet
Power Sourcing Equipment (PoE/PSE) on Standard Category 5
Ethernet Cable
Note: By Ethernet standards, the maximum cable length is limited to
328 ft. (100 m) between the PoE source and the DirecDoor
controller.
-Or-
•
Auxiliary 24 VDC 1 A local supply (24 watts)
Cabling
Host to controller
•
Network: Cat 5 Type A or B